As a Notary, when you do an Acknowledgment, the signer does not need to sign in your presence (in most states). However, they need to appear before you and sign your journal. You must check to see if the signatures match the ID, journal and document. If they don’t, you have a big problem. Also, make sure the person looks like they do in their ID, and note down their ID information in your journal which of course you keep because you can get in trouble if you don’t keep one even in states that don’t require it.

As a Notary, you will be confronted by a myriad of inconsistencies. Names on identifications don’t always match names on documents. We have discussed this multiple times in our John Smith examples where the name on the ID is shorter than the name on the document which in my examples is normally John W. Smith. However, I want to introduce the complexities of name variations in an organized way.

.

RULE #1: The name on the ID must prove the name on the Acknowledgment
The name on the ID is not always identical or “matching” the name on the document. I do not like the term “matching” because it has multiple connotations and therefor is not clear. The name on the identification must PROVE the name on the Acknowledgment as a minimum.

Example
The name on the ID says John Smith.
The typed name on the document says John William Smith
The signature on document says John William Charles Smith
The name on the Acknowledgment cannot say more than John Smith otherwise you are notarizing someone whose name you cannot prove.

Whether or not your state approves you notarizing a signature that is longer or not matching the name on the identification is between you and your state. But, according to sensible practices, the main thing is what name you are Acknowledging the person as, because that is your job as a Notary. As a Notary, you have to prove the identity of the signer and certify that information in the form of a Notary certificate. What goes on the certificate must be true under the penalty of perjury in California and must be true in other states otherwise it could be considered fraudulent. In this example, you can prove the signer is John Smith, he over signed the document which the Lenders don’t usually mind, and you notarized him once again as John Smith — nothing more, nothing less.
.

RULE #2: The typed name on the document ideally exactly matches the signature, but, if the Lender says it’s okay, an over signed version of the same name would suffice.

i.e. If the typed name says John William Smith, then the signature could be John William Charles Smith.
.

RULE #3: The name on the Acknowledgment can be an exact match of the signature if provable by ID, or a partial match of the signature that is proven by the identification.

i.e. If the signature says John William Charles Smith, you can notarize the signature as that name if it that name variation is entirely provable based on the ID, or you can notarize him as John Smith as the ID proves that name.
.

RULE #4: The typed name on the document is supposed to match the name on Title.

The recording agency has a particular name on title, and loan documents are supposed to match the name on title. Sometimes people change their name on title using Grant Deeds and Quit Claim Deeds and which form you use to change a name on title depends on what state you live and your individual situation, and I am not trained in these matters, (sorry.)
.

Rule #5: Just because you are obeying sensible practices and the law doesn’t mean the Lender won’t get mad and fire you.

The Lender wants the name notarized based on how the name reads on the documents as a general rule. Usually times you can get away with notarizing a shorter version of the name for legal reasons. If you have a situation where you have a choice between breaking the law and pleasing the Lender, choose obeying the law. If you have a choice between pleasing the Lender and taking liberties identifying someone which is a wishy-washy point in the legal code in many states (look up your state’s requirements for proving someone’s name — many states only say that you have to check their ID, but not see if the names exactly match) then you have a judgement call.

.

Summary of rules using fortune cookie English

1. Name on ACKNOWLEDGMENT must be proven by name on IDENTIFICATION

2. Name on ACKNOWLEDGMENT must be part or whole of name on SIGNATURE

3. Name on SIGNATURE can match exactly or be a longer variation of TYPED NAME on document.

4. TYPED NAME on document should MATCH name on TITLE

5. LENDERS want name on the Acknowledgment to match TYPED NAME on document, but this is not always legally possible.

.

You might also like:

The ID says John Smith
http://blog.123notary.com/?p=19953

What’s your sign? A guide to spotting fake ID’s.
http://blog.123notary.com/?p=19638

Credible Witnesses – the ins and outs
http://blog.123notary.com/?p=19634

.

Most Notaries like to cross-out and initial changes in certificates. Keep in mind that these are legal documents affecting million dollar properties. Cross-outs look like tampering. It is CLEANER to take a fresh acknowledgment form from your Notary bag, fill it out thoroughly including the additional information section with the name of the document, number of pages, etc., And then staple it on to the document. On the other hand, using a new form could change the recording fees for the loan which would affect the truthfulness of the information on the Closing Statement.

If there is a cross-out for a name on a certificate that is a quite serious legal issue. It could lead to complications should you ever go to court. It is your right to decide to use a fresh acknowledgment form and staple it on the document even if the Lender doesn’t want it that way. Lenders sometimes prefer to use the original form because it is inscribed within the document. But, also because a new form will be charged extra money from the county recorder. Lenders sometimes lose loose acknowledgment forms which is yet another reason many Lenders prefer to fix the original.

As a Notary, you may be faced with the unpleasant reality that the Lender may have already filled out your Acknowledgment form, and with wrong information. If the form says you are in Orange County when you are in Seminole, you cannot notarize that form as is. So, what do you do and what are the consequences?

I cannot tell you what your state laws allow or require, I can only tell you how to handle forms in a prudent way.

Fix the Existing Form
If you are going to fix the existing Acknowledgment, just cross-out the wrong information with a single line, write in the correct county, and the Notary initials. The borrowers can initial changes to documents, but should not initial changes to certificates unless your state says so in writing. Fixing the existing form has the advantage that there will not be any changes to the recording fee for the loan. If you start adding additional pieces of paper, that will change the information on the HUD or CD and open a can of worms which some Lenders don’t like. On the other hand it is cleaner to replace the form rather than to fix it as fixing it looks like potential tampering.

Replace the Form
To replace an Acknowledgment, just staple on a new Acknowledgment, fill it out, sign and seal. Please also fill out what is called the optional and additional information which is normally about the document such as number of pages, document date, etc.

Communication Errors
When I ask Notaries how to fix a wrong county on an acknowledgment, some of them tell me how to replace it. Fix and replace are not the same word, so please do not answer a different question from what I asked. Please also be aware of the benefits and costs of replacing the form rather than fixing it.

.

You might also like:

The 30 point course – initialing
http://blog.123notary.com/?p=14463

The man who wouldn’t use his middle initial.
http://blog.123notary.com/?p=4040

What is the cleanest way to rectify an error on a certificate?
http://blog.123notary.com/?p=20018